Next, you need to install a window

[zihadhosenjm40]

First, the upper part of the racks is tied horizontally. Then the rafters are mounted at a pitch such that it will be convenient to place insulation between them later (if necessary). The lathing is laid on the rafters, for which you can use sawing waste, even slabs. And finally - the top coating. For the roof, you can use slate, any type of tiles, various roll materials (simple roofing felt, fused, reinforced, etc.).

Watch the video on how to install a roof for outbuildings using corrugated sheets.

Barn Finishing
Now you can start the exterior finishing. Here, the flight of your mom data can be wide. You can do any kind of cladding with your own hands – boards, clapboards, plastic, siding (if there is any left from the main construction on the site). The last two materials do not require additional finishing, but wooden elements must be treated with an antiseptic and covered with paint, enamel or varnish.

(if provided) and a door. When installing the frame and external wall cladding, you need to provide openings in advance. Both the window and the door can be ready-made, or you can make them yourself. There is no particular difficulty in this, if only there is desire, materials and tools.

The final stage of building a utility block is interior finishing of the building. It is necessary when the premises must retain heat well. For this purpose, additional vertical and horizontal beams are installed between the main frame posts. Between them, as well as between the rafters, insulation is laid, which is mineral or stone wool, foam plastic. And the interior finishing of the walls and ceiling can be done with boards, clapboard, chipboard or plasterboard sheets.

We recommend watching a video with a selection of ideas for decorating courtyard spaces.

Then you can paint it or not, but it is advisable to cover it with drying oil or oil. And, to make the barn really warm and comfortable, it would be a good idea to cover the insulation with a layer of vapor barrier before the final wall paneling.