Corners on the edges of steps
Posted: Mon Feb 17, 2025 9:47 am
Among the main advantages of rolled rubber coverings:
Can be installed on any porch shape;
Easy to clean from dirt;
Tolerates low temperatures well without losing elasticity;
Absorbs external load;
Low price.
The installation of rubber flooring is quite simple: it is installed like a puzzle, and roll products are simply rolled out. Due to the use of secondary raw materials, waste tires, in the production of this flooring, the price of rubber flooring is significantly lower than the price of metal analogues.
The disadvantages include the fact that in the case of expensive marble or granite covering, almost the entire surface of the porch will be covered with rubber, which will affect the appearance of the house.
How to Make Stair Steps Non-Slip
We are asked:
In a country house, the previous owner built a staircase to the second floor (rotary, 180%, with winder steps). During operation, it turned out that the surface is very slippery, especially for children. Please advise possible options for eliminating this dangerous inconvenience.
We answer:
There are many options:
1. Installing special strips or corners on the edge of the steps. They are aluminum or galvanized profiles with a rubber strip glued on. They are sold in construction stores.
2. → Facing steps (the link tells how to face steps) with nurse data anti-slip tiles (used for facing → porches (the link tells how to make a porch with your own hands), some samples even neutralize light icing).
Anti-slip tiles
3. Laying a carpet runner on the steps (→ carpet (for information on laying carpet, follow the link), plastic). It is attached with special fasteners, which can be of various designs. For example, on the back edge of the tread, where the riser of the next step begins, i.e. in the very corner, rings are installed into which a metal rod is passed. The rod is fixed either with a decorative nut or some kind of lock. The carpet runner is laid along the entire length of the flight, and to prevent it from getting knocked down or sliding, you fix it on each step, pressing it with such rods. Fasteners for carpet runners on steps can be seen in a wide range in large construction supermarkets. Depending on the type of steps, the fasteners can be placed differently, for example, on the risers or even on the sides of the steps.
Laying carpet on steps
Can be installed on any porch shape;
Easy to clean from dirt;
Tolerates low temperatures well without losing elasticity;
Absorbs external load;
Low price.
The installation of rubber flooring is quite simple: it is installed like a puzzle, and roll products are simply rolled out. Due to the use of secondary raw materials, waste tires, in the production of this flooring, the price of rubber flooring is significantly lower than the price of metal analogues.
The disadvantages include the fact that in the case of expensive marble or granite covering, almost the entire surface of the porch will be covered with rubber, which will affect the appearance of the house.
How to Make Stair Steps Non-Slip
We are asked:
In a country house, the previous owner built a staircase to the second floor (rotary, 180%, with winder steps). During operation, it turned out that the surface is very slippery, especially for children. Please advise possible options for eliminating this dangerous inconvenience.
We answer:
There are many options:
1. Installing special strips or corners on the edge of the steps. They are aluminum or galvanized profiles with a rubber strip glued on. They are sold in construction stores.
2. → Facing steps (the link tells how to face steps) with nurse data anti-slip tiles (used for facing → porches (the link tells how to make a porch with your own hands), some samples even neutralize light icing).
Anti-slip tiles
3. Laying a carpet runner on the steps (→ carpet (for information on laying carpet, follow the link), plastic). It is attached with special fasteners, which can be of various designs. For example, on the back edge of the tread, where the riser of the next step begins, i.e. in the very corner, rings are installed into which a metal rod is passed. The rod is fixed either with a decorative nut or some kind of lock. The carpet runner is laid along the entire length of the flight, and to prevent it from getting knocked down or sliding, you fix it on each step, pressing it with such rods. Fasteners for carpet runners on steps can be seen in a wide range in large construction supermarkets. Depending on the type of steps, the fasteners can be placed differently, for example, on the risers or even on the sides of the steps.
Laying carpet on steps