They are widely used in pulp and paper mills

[aminaas1576]

The blades are evenly distributed on the outer edge of the cutting disc. The air flow generated by the blades blows the wood chips out of the outlet. After sorting, large sawdust enters the crusher for crushing. The machine has three types: fewer blades, more blades and spiral blades. The uniformity of cutting wood chips of the first two types is poor.

Since the cutting surface of the spiral blade disc is in contact with the cutting disc during the cutting process, the unit pressure is small, the sawdust is cut neatly, there is less broken sawdust, the wear of the cutting disc is small, the length of the cut sawdust is uniform, and the percentage of quality sawdust can reach about 97%. In order to meet the different requirements of the paper, fiber and particle industries for the length of sawdust, the length of the sawdust can be adjusted colombia number data within a certain range. The disc crusher has a compact and reasonable structure, easy operation, large output, high percentage of quality sawdust and low energy consumption per unit of sawdust output. It is an ideal equipment for producing high-quality sawdust.


Disc chippers are mainly used for cutting logs, and the quality of sawdust is good.


Maintenance and care of wood chippers
Before installing the crusher, the site should be leveled first, and the soil should be compacted if possible. The equipment should be installed stably, and the installation direction should be determined according to the actual situation of the site and the raw materials.

The wood chipper tool should be checked and replaced regularly. For example, if the material is large and the wood material is good, the self-rotation of the wood chipper will also have a certain impact on the tool after turning on. The chipper blade is made of alloy steel. If it is worn out or the angle changes after long-term use, the blade fixing screw can be loosened and the blade can be removed for sharpening and adjustment. If the wear is too great, a new blade of the same size should be replaced.