Two Bottle Hopper Bird Feeder

[zihadhosenjm40]

You need to step back a little from the bottom (8–10 cm is enough).
Two holes are made parallel to each other. The handle of one spoon should easily pass through them.
You need to step up again by 7–10 cm.
Here the same holes are made, but on the other sides of the bottle.
The handle of the second spoon must also be passed through spain mobile database holes made. As a result, the spoons will be located perpendicular to each other in one plane.
To make the food pour out onto the spoons more easily, it is better to make the holes larger on the wide sides.
The bottle is hung on tree branches where it will not be swayed by the wind.

This type of feeder can also be made from a 5-liter plastic bottle, but for large containers it is better to leave other methods of creating a bird kitchen.

To create a bunker bird cafe you will need two 1.5-liter bottles.

Less than an hour and you can delight all the birds in the area.

First, you need to cut two round holes in one bottle. They should be located approximately 7-8 cm from the bottom. The second bottle needs to be turned and inserted into the hole. This is why it is not recommended to make too large cuts at first: the inserted container should not swing freely. If everything is assembled correctly, the neck will not reach the bottom completely. You can pour in the grain!

The product is suspended using ropes or installed between strong branches, slightly clamping the bottles.

The essence of the bunker model is that as soon as a certain amount of feed is eaten, the next portion will be constantly added in its place.
Also a version of a craft made of two eggplants: 5-liter and 0.5-liter.
The feed is added automatically.