The order of actions is as follows:

[zihadhosenjm40]

clogging of the space between the knives and the gearbox housing with clods of earth;
the handle and frame structure sometimes need reinforcement;
malfunctions of the rope starter and piston group;
Long periods of inactivity (more than one season) cause the cylinder, magneto, piston and other parts to become unusable.
If the starter breaks down, the user faces the problem of starting the device. Therefore, it is important to know how to start the Krot walk-behind tractor with a non-working starter.

Most often, the starter of a walk-behind tractor breaks down.


Remove the starting device.
Find a rope or clothesline between 1.5 and 2 m long.
Thread the end of the cord into norway mobile database hole where the starter was mounted.
Wrap the rope around, leaving 50 cm free.
Attach a small holder to the end of the rope.
Pull the cord sharply and forcefully.
Repeat the previous action until the mechanism starts.
The method described above is dangerous, so it should only be used in cases of extreme necessity. It is recommended to purchase a new starter and replace the old one with it. If you do start the engine with a rope, it is important not to wrap it around your hand. Otherwise, the engine may pinch your limb, causing serious injuries.

Won't start
If the Krot walk-behind tractor does not start, you need to check the following parameters:

fuel supply to the carburetor;
control lever position;
inspect the spark plug;
make sure there is fuel in the tank.
It is necessary to check the fuel supply to the carburetor if the walk-behind tractor does not start

It is imp