Its pile can be medium or long, uniform.
Posted: Mon Feb 10, 2025 5:09 am
It is used for painting walls and ceilings of different relief with water-based paints.
I can also add from my experience that, as a rule, it starts to peel after the first painting, and sometimes during it. Before starting to paint, such a roller should be washed in soapy water and rinsed, and also make sure that it does not peel, that is, it is not defective (which has happened quite often in my lifetime).
Painting with a roller
After you have decided on the surface and indonesia mobile database composition, selected a roller for painting, you can actually start painting. It is clear that the surface must be properly prepared, putty "for painting" (high-quality finish) and primed with a primer for the appropriate paint composition.
Roller painting starts from the ceiling so that the finishing layer is applied with tool movements parallel to the direction of the sun's rays, i.e. perpendicular to the window, which is located on the sunniest side. First, corners and other hard-to-reach areas are processed using the appropriate tool (brush).
The paint is applied to the walls and ceilings with roller movements from top to bottom/away from you, on a small area in one direction, then immediately shaded with perpendicular movements of the tool. The next layer is the opposite. The finishing layer is shaded in the direction of the sun's rays.
Painting is done in 2-3 layers, and the first can be a primer. The primer composition can be made by diluting the paint (10% solvent) or, better, buy it together with the paint from the same manufacturer.
In the old days, plaster was used only as a base for painting, and the actual decoration of the walls was done with paint. However, progress does not stand still, and today it has become fashionable to cover the walls with decorative plaster. At the same time, the process of finishing the surface of such plaster is not difficult. It is possible to create a stylish design for the room, adding unusualness to it with the help of special rollers for decorative plaster. It is interesting that such an accessible and popular tool for leveling walls has become a full-fledged means for performing decorative finishing of walls. The secret of such a device lies in textured rollers that allow you to make figured prints on the walls, imitating various types of surfaces and textures, for example, the texture of brush, wood, stone and even the effect of a "fur coat".
I can also add from my experience that, as a rule, it starts to peel after the first painting, and sometimes during it. Before starting to paint, such a roller should be washed in soapy water and rinsed, and also make sure that it does not peel, that is, it is not defective (which has happened quite often in my lifetime).
Painting with a roller
After you have decided on the surface and indonesia mobile database composition, selected a roller for painting, you can actually start painting. It is clear that the surface must be properly prepared, putty "for painting" (high-quality finish) and primed with a primer for the appropriate paint composition.
Roller painting starts from the ceiling so that the finishing layer is applied with tool movements parallel to the direction of the sun's rays, i.e. perpendicular to the window, which is located on the sunniest side. First, corners and other hard-to-reach areas are processed using the appropriate tool (brush).
The paint is applied to the walls and ceilings with roller movements from top to bottom/away from you, on a small area in one direction, then immediately shaded with perpendicular movements of the tool. The next layer is the opposite. The finishing layer is shaded in the direction of the sun's rays.
Painting is done in 2-3 layers, and the first can be a primer. The primer composition can be made by diluting the paint (10% solvent) or, better, buy it together with the paint from the same manufacturer.
In the old days, plaster was used only as a base for painting, and the actual decoration of the walls was done with paint. However, progress does not stand still, and today it has become fashionable to cover the walls with decorative plaster. At the same time, the process of finishing the surface of such plaster is not difficult. It is possible to create a stylish design for the room, adding unusualness to it with the help of special rollers for decorative plaster. It is interesting that such an accessible and popular tool for leveling walls has become a full-fledged means for performing decorative finishing of walls. The secret of such a device lies in textured rollers that allow you to make figured prints on the walls, imitating various types of surfaces and textures, for example, the texture of brush, wood, stone and even the effect of a "fur coat".