What is the best glue for porcelain tiles?

[zihadhosenjm40]

Small or outdoor metal surface
First, the metal needs to be protected from corrosion by covering it with a special primer. As practice shows, the most practical adhesive element in this case is polyurethane foam.

Apply it to the metal surface in a continuous layer, let it dry completely. Then cut off the top layer, as a result the surface of the foam will become rough, which contributes to good adhesion of the glue.

The porcelain tiles are glued using an adhesive suitable greece mobile database the operating environment. Unprotected edges of the foam should be covered, as it is destroyed by ultraviolet radiation.

Thanks to the foam layer, metal deformation processes under the influence of external factors do not affect the tile.

IMPORTANT! Do not use polyurethane foam to lay floor tiles. If necessary, weld a mesh to the metal, pour a screed, and then glue the finishing elements.

In addition to the above options, porcelain stoneware can be glued to metal using a special polyurethane-based adhesive.


As it turns out, porcelain stoneware is a very practical facing covering that can be glued to almost any surface. Thanks to this property, you can make repairs and forget about remodeling for many years.

How and what to glue porcelain tiles to the floor and the technology of cladding
For ceramic finishing of floor surfaces, the material of choice is porcelain stoneware tiles. Craftsmen who are laying such screed facing for the first time have a question about what to glue porcelain stoneware for the floor, how to properly prepare the surface, what are the features of working with artificial stone for ennobling the floor surface.