start plastering from the ceiling;

[zihadhosenjm40]

Before applying Rotband, it is necessary to apply a deep-penetrating primer, which improves adhesion to the base and prevents moisture from seeping from the plaster into the gypsum board. For work, use a spatula of 30 cm in size, holding it at an angle of 40 degrees. Drying of Rotband lasts 24-48 hours, depending on the thickness of the layer.

Tips and tricks
If you decide to finish the room with plasterboard sheets, you should buy moisture-resistant material. It is more expensive, but much better quality. Even in dry rooms, unexpected contacts of the croatia mobile database with water are possible, while the integrity of the plasterboard will be preserved. To ensure that the work is carried out effectively, you should follow these tips:

work at temperatures ranging from +5 to +30 degrees and humidity up to 60%;
eliminate the appearance of drafts in the room;
monitor the condition of the plasterboard joints - cut off any peeling cardboard, sand the seams with sandpaper, and repair chips;
Cover sockets and switches with masking tape to prevent splashes;
do not forget to apply a primer, if possible, apply at least 2 layers of primer;
apply the reinforcing tape exactly in the middle of the seam;
dilute dry mixtures only with cold water.
Working with plasterboard is easy, and the result is excellent if you follow the technology. This material allows you to make the walls even, create beautiful structures and make the interior modern and stylish!

Any work begins with preparation, be it pouring the foundation, wallpapering the walls or plastering. The final result depends on this important stage. That is why high-quality preparation of the walls for decorative plaster is necessary. Step-by-step instructions will help you cope with this task.

Preparing the necessary tools
The preparatory stage can be completed even by a novice builder. The process itself is responsible, but not complicated. Here is what you will need from the tools: