Features of installation of facade thermal panels

[zihadhosenjm40]

The quality of laying thermal panels can only be guaranteed if there is a perfectly flat base. If the geometry of the facade is disturbed, it is permissible to use lathing. The main tools that will be needed in the work are a building level, an electric drill, a screwdriver, a hammer. To fix the building materials on the facade, use dowels, glue or foam for polystyrene foam. The installation procedure is described below.

Preparing the work surface before laying the facade thermal panels. This includes cleaning from dust and dirt, as well as old decorative coating (optional). If there are any uneven areas, they must be eliminated, achieving a perfectly straight base.
Setting the horizon line using a regular or laser level. Aluminum or wooden planks are also used, which are placed next to each other parallel. The distance between the beacons should be equal to the thickness of the thermal panel.
Laying the first building element in the left corner of the building using the chosen method (glue, foam or dowels). The first row is mounted on the base. If dowels are used, their number is canada mobile database based on the area. There are 10-15 fasteners per square meter.
Laying the remaining facade thermal panels with orientation to the tongue and groove joint system. Corner elements, which are purchased separately, are required at the joints of the walls. Door and window openings are decorated using facing tiles, cement-sand mortar or a ready-made decorative solution.
Filling the gap between the base profile and the building wall with polyurethane foam to prevent air circulation behind the facade cladding.
Grouting. A special frost-resistant mixture for outdoor use, applied with a gun, will do. Despite the fact that the composition itself can withstand operation at low temperatures, you can only work with it if the temperature outside the premises is at least +5 °C.
Domestic manufacturers of facade panels
On the Russian market, facade thermal panels are represented by products from several manufacturers. Some of the most famous brands are:

"Regent". Supplies domestic facade thermal panels to the Russian market, the top layer of which is made of clinker tiles. Foamed material - polyurethane foam - is used as insulation. The panel sizes are standard and are 240 x 72 mm. The thickness of the tiles (the top decorative layer) varies from 8 to 14 mm, polyurethane foam - from 40 to 80 mm.
"TermoSoyuz". A large plant for the production of facade materials. Clinker tiles, which are produced in Germany from natural clay, are used as the top layer. Construction materials are available in several shades, sizes and thicknesses.
"Fried". Thermal panels from this manufacturer reliably imitate brick with clinker and ceramic tiles, as well as porcelain stoneware. Seamless solutions are available for sale, slabs of various sizes with a thickness that varies from 30 to 100 mm. Polyurethane foam is used as insulation, and the rigid base is made of oriented strand board (OSB).
"Termozit". A major Russian manufacturer of clinker panels - facade and basement. The thickness of the products varies from 30 to 80 mm. The base is made of high-quality polyurethane foam.