The structures and materials of the foundations
Posted: Sun Feb 09, 2025 8:53 am
5.17 The width of ramps for the passage of floor vehicles must be at least 0.6 m greater than the maximum width of the loaded vehicle. The slope of ramps should be no more than 16% when placed indoors and no more than 10% when placed outside buildings.
5.18 The installation of gates, railway track inputs, skylights, internal drains, parapets and devices for cleaning and repairing window and skylight glazing should be adopted in accordance with the requirements of SNiP 31-03.
5.19 In warehouse premises, the temperature, relative humidity and air afghanistan mobile database must be taken in accordance with the requirements of cargo storage technology and the requirements of SNiP 2.04.05.
5.20 and floor coverings of warehouse buildings and premises should be designated taking into account the perception of loads from stored goods, the type and intensity of mechanical impacts of floor transport and dust separation in accordance with the requirements of SNiP 2.03.13.
6. PREVENTING THE SPREAD OF FIRE
6 PREVENTING THE SPREAD OF FIRE
6.1 The degree of fire resistance, the class of structural fire hazard, the height of warehouse buildings and the area of the building floor within the fire compartment shall be taken from Table 1.
In the presence of open technological openings in the floors of adjacent floors, the total area of these floors shall not exceed the floor area specified in Table 1.
When equipping warehouse premises with automatic fire extinguishing systems, the floor areas specified in Table 1 may be increased by 100%, with the exception of buildings of the IV fire resistance degree of all fire hazard classes.
When placing warehouses in industrial buildings, the floor area of warehouse premises within the fire compartment and their height (number of floors) shall not exceed the values specified in Table 1.
5.18 The installation of gates, railway track inputs, skylights, internal drains, parapets and devices for cleaning and repairing window and skylight glazing should be adopted in accordance with the requirements of SNiP 31-03.
5.19 In warehouse premises, the temperature, relative humidity and air afghanistan mobile database must be taken in accordance with the requirements of cargo storage technology and the requirements of SNiP 2.04.05.
5.20 and floor coverings of warehouse buildings and premises should be designated taking into account the perception of loads from stored goods, the type and intensity of mechanical impacts of floor transport and dust separation in accordance with the requirements of SNiP 2.03.13.
6. PREVENTING THE SPREAD OF FIRE
6 PREVENTING THE SPREAD OF FIRE
6.1 The degree of fire resistance, the class of structural fire hazard, the height of warehouse buildings and the area of the building floor within the fire compartment shall be taken from Table 1.
In the presence of open technological openings in the floors of adjacent floors, the total area of these floors shall not exceed the floor area specified in Table 1.
When equipping warehouse premises with automatic fire extinguishing systems, the floor areas specified in Table 1 may be increased by 100%, with the exception of buildings of the IV fire resistance degree of all fire hazard classes.
When placing warehouses in industrial buildings, the floor area of warehouse premises within the fire compartment and their height (number of floors) shall not exceed the values specified in Table 1.