It is better to zone the lighting in the kitchen

[zihadhosenjm40]

It is recommended to use LED strip, individual LEDs or fluorescent bulbs for two-level lighting.

Kitchen Lighting: How to Do It Right
Traditionally in our country, the kitchen is thailand mobile database only a place where food is prepared, but also a place for eating and private gatherings. Therefore, lighting in the kitchen should be not only practical, but also beautiful and comfortable.

The kitchen is a room that has at least two zones with different purposes - a work area for cooking and a dining area. Different purposes also imply different requirements for kitchen lighting: the work area should have bright lighting that allows you to see everything clearly, and the dining area should have softer lighting.

But zoned kitchen lighting does not exclude the presence of a chandelier. Its functional significance is small, since the light spot is obtained in the center of the room, which remains mostly empty. But from the point of view of leveling uneven illumination, this method is very good. Alternatively, you can use several spotlights, as in the photo above, or install built-in ceiling lights if the ceiling is stretch or suspended from plasterboard.

You need to think about kitchen lighting at the renovation stage, when the electrical panel is assembled, the wiring is pulled, and the locations for installing sockets and switches are marked. Later, after the renovation is finished, it is very problematic to do this - you have to lay the wiring on top or in cable channels.

When you are just planning the lighting in the kitchen, the question arises of how many lamps are needed and what power. It's simple: there are standards for illumination for each room for the kitchen, this is 150 Lux per square meter of area. Calculating illumination in Watts is no longer relevant, since a 7 W LED lamp can produce light as a 50 W incandescent lamp or 650 Lm.

For example, let's calculate how much light is needed for a kitchen with an area of ​​12 m2. To do this, we multiply its area by the standard: 12 m2 * 150 Lx = 1800 Lx. And since 1 Lux is equal to 1 Lumen, it is necessary to install light bulbs that together give at least 1800 Lm.