supplying water to drinking bowls.
Posted: Sun Feb 09, 2025 5:24 am
bending the edges of the sheet metal so that their height is 2-4 cm, and the internal dimensions are 60-70 cm;
creation of the required number of trays;
welding two metal plates (2 by 3 cm) to the front parts of the cages on the sides;
installation of cages on the frame, fastening with self-tapping screws;
making feeders from thin plywood sheets (height of vertical wall – 10 cm, bottom – 15 cm, height of back wall – 12.5 cm);
attaching metal hooks to the feeders using self-tapping screws and installing them at a height of 15-20 cm from the bottom of the cages;
longitudinal cutting of plastic pipes for drinking bowls using a hot knife, installation of sealed plugs on the sides and fixing them 7-10 cm above the level of the feeders;
The frame can be mounted on wheels. This will help poland mobile database easily move the cages around the room or outside during the warm season. For convenient transportation, wheels should be mounted on small frames that accommodate up to 6 cages with laying hens.
The cage lids can be made movable. This will make their maintenance easier.
If the cages are installed on a wooden frame, the metal corners can be replaced with a 10 cm square beam for vertical support and a 4 cm beam for the horizontal crossbar. It is assembled using self-tapping screws with additional crossbars installed at an angle of 45 degrees to the supporting beams. To speed up the installation work, one common floor with a slope can be installed, and then the cages without a floor can be placed on top.
Litter trays should be installed one per maximum of two cages, this will make it easier to clean.
In this video, a poultry farmer talks about the features of creating cage structures for keeping laying hens:
Keeping layers in cages will help to significantly save on bird costs and will make the process of caring for them easier. However, with this method it is necessary to follow the basic rules regarding cages, cleaning and temperature conditions in the room.
creation of the required number of trays;
welding two metal plates (2 by 3 cm) to the front parts of the cages on the sides;
installation of cages on the frame, fastening with self-tapping screws;
making feeders from thin plywood sheets (height of vertical wall – 10 cm, bottom – 15 cm, height of back wall – 12.5 cm);
attaching metal hooks to the feeders using self-tapping screws and installing them at a height of 15-20 cm from the bottom of the cages;
longitudinal cutting of plastic pipes for drinking bowls using a hot knife, installation of sealed plugs on the sides and fixing them 7-10 cm above the level of the feeders;
The frame can be mounted on wheels. This will help poland mobile database easily move the cages around the room or outside during the warm season. For convenient transportation, wheels should be mounted on small frames that accommodate up to 6 cages with laying hens.
The cage lids can be made movable. This will make their maintenance easier.
If the cages are installed on a wooden frame, the metal corners can be replaced with a 10 cm square beam for vertical support and a 4 cm beam for the horizontal crossbar. It is assembled using self-tapping screws with additional crossbars installed at an angle of 45 degrees to the supporting beams. To speed up the installation work, one common floor with a slope can be installed, and then the cages without a floor can be placed on top.
Litter trays should be installed one per maximum of two cages, this will make it easier to clean.
In this video, a poultry farmer talks about the features of creating cage structures for keeping laying hens:
Keeping layers in cages will help to significantly save on bird costs and will make the process of caring for them easier. However, with this method it is necessary to follow the basic rules regarding cages, cleaning and temperature conditions in the room.