What you will need for installation: materials and tools
Posted: Sun Feb 09, 2025 5:22 am
sheet with polymer coating, painted (plastic and synthetic resins);
a sheet coated with plastisol or polyester, with increased wear resistance.
Sheets also differ in marking (marking of steel thickness, type, width, wave height):
H – load-bearing profiled sheet intended for roofing works.
C – wall sheet, suitable for building fences and walls. The number indicates the height of the corrugation in mm (C10, C21, C20).
NS is a general-purpose sheet suitable for any construction work.
Additionally, profiled sheets are marked with the letters A and R. A-profiles are used for fences (they are intended for painting on one side)
Materials included in the estimate:
Profiled sheet of the selected brand.
Metal pipes (used as support posts).
Guide tubes (standard steel profiles).
Consumables (dowels, screws or rivets).
Roofing felt to protect the holes from soil crumbling (if it is decided to concrete the posts) and primer to protect the attachment points.
Ready-mixed concrete, or its components – sand, crushed stone and cement (if the solution is mixed manually).
If it is necessary to install a fence on a slope, the peru mobile database sheet will have to be additionally processed Source zavodsota.ru
In addition to materials, you will need the following tools:
Rope, nylon thread and wooden stakes for preliminary marking.
Tape measure (minimum 4 m) and building level.
Hand drill (can be replaced with a shovel).
Welding machine for frame assembly.
Drill, screwdriver.
a sheet coated with plastisol or polyester, with increased wear resistance.
Sheets also differ in marking (marking of steel thickness, type, width, wave height):
H – load-bearing profiled sheet intended for roofing works.
C – wall sheet, suitable for building fences and walls. The number indicates the height of the corrugation in mm (C10, C21, C20).
NS is a general-purpose sheet suitable for any construction work.
Additionally, profiled sheets are marked with the letters A and R. A-profiles are used for fences (they are intended for painting on one side)
Materials included in the estimate:
Profiled sheet of the selected brand.
Metal pipes (used as support posts).
Guide tubes (standard steel profiles).
Consumables (dowels, screws or rivets).
Roofing felt to protect the holes from soil crumbling (if it is decided to concrete the posts) and primer to protect the attachment points.
Ready-mixed concrete, or its components – sand, crushed stone and cement (if the solution is mixed manually).
If it is necessary to install a fence on a slope, the peru mobile database sheet will have to be additionally processed Source zavodsota.ru
In addition to materials, you will need the following tools:
Rope, nylon thread and wooden stakes for preliminary marking.
Tape measure (minimum 4 m) and building level.
Hand drill (can be replaced with a shovel).
Welding machine for frame assembly.
Drill, screwdriver.