The next step is to create a flat surface from fiberboard.
Posted: Sun Feb 09, 2025 4:21 am
It is necessary to lay polyethylene on the film heated floor
This material will provide reliable protection for the heated floor and will be an excellent base for laying linoleum.
Since such coverings are supplied in rolls, they are first laid out for several days in a large room. But in our case, there is an advantage - the linoleum can be spread over the fiberboard and the underfloor heating system can be turned on so that the material heats up. The radiated heat will level it out much faster. In this case, the thermostat should be set to a heating mode of up to 28 degrees, since this temperature is considered optimal for linoleum.
Once the coating has acquired the required evenness, it can be netherlands mobile database base. To perform this operation, use double-sided tape or glue. The second mounting option is used if dismantling the heating system and moving it to another location is not planned.
Safety precautions
This is an important part. We already know how to properly install a heated floor, it remains to consider the main issue - safety. If you neglect its requirements, then in the future you can greatly regret it not only you, but also your relatives.
As statistics show, most problems could have been prevented by elementary actions. So, the safety requirements that must be observed are:
the thermostat is set only when you are sure that the electricity is off;
It is strictly forbidden to turn on the heating system without first checking the reliability of the insulation;
It is not recommended to set the thermostat to a temperature higher than thirty degrees Celsius;
The heating strips are not laid with an overlap. This can create a prerequisite for overheating, which can cause the entire system to fail.
If you decide to lay infrared film under linoleum yourself, use useful recommendations on choosing a floor covering and the rules for installing a heating system. Following the instructions, you can create an additional heating system with your own hands to feel comfortable in the winter.
This material will provide reliable protection for the heated floor and will be an excellent base for laying linoleum.
Since such coverings are supplied in rolls, they are first laid out for several days in a large room. But in our case, there is an advantage - the linoleum can be spread over the fiberboard and the underfloor heating system can be turned on so that the material heats up. The radiated heat will level it out much faster. In this case, the thermostat should be set to a heating mode of up to 28 degrees, since this temperature is considered optimal for linoleum.
Once the coating has acquired the required evenness, it can be netherlands mobile database base. To perform this operation, use double-sided tape or glue. The second mounting option is used if dismantling the heating system and moving it to another location is not planned.
Safety precautions
This is an important part. We already know how to properly install a heated floor, it remains to consider the main issue - safety. If you neglect its requirements, then in the future you can greatly regret it not only you, but also your relatives.
As statistics show, most problems could have been prevented by elementary actions. So, the safety requirements that must be observed are:
the thermostat is set only when you are sure that the electricity is off;
It is strictly forbidden to turn on the heating system without first checking the reliability of the insulation;
It is not recommended to set the thermostat to a temperature higher than thirty degrees Celsius;
The heating strips are not laid with an overlap. This can create a prerequisite for overheating, which can cause the entire system to fail.
If you decide to lay infrared film under linoleum yourself, use useful recommendations on choosing a floor covering and the rules for installing a heating system. Following the instructions, you can create an additional heating system with your own hands to feel comfortable in the winter.