The following systems are distinguished:

[zihadhosenjm40]

Since the equipment operates on solar energy, the heater will be installed outdoors. It is recommended to install it on the roofs of buildings, on balconies or other architectural projections.

The water heater screen should be directed to the south. Installation is kenya mobile database out at a certain angle to the horizon, which is equivalent to the geographical latitude of the area.

The water heater constantly absorbs energy and for obvious reasons the energy source cannot be turned off, therefore, in case of low water consumption, the stagnation temperature can reach up to 300°C.

For this reason, the use of plastic and steel pipes with a zinc coating is not allowed. Pipelines made of copper or stainless steel will be optimal in operation.

The hot circuit of the solar water heater must have thermal insulation, this will prevent burns and fires. The temperature mode of the equipment operation should be taken into account when choosing thermal insulation and fasteners.

Manufacturers of solar water heaters indicate the exact stagnation temperature on the body of their products.
Collector panels should be located in an open space so that there is open access to sunlight. It is necessary to exclude the presence of possible obstacles.

Most often, the slope of the collector will be the slope of the roof. In order to bring the efficiency of the water heater closer to maximum, it is better to follow the recommendations and use a special rack on which the collector will be mounted.

That is, the key to correct and efficient operation of the equipment is just a few rules:

direction to the south;
correct angle of inclination;
unobstructed access to sunlight;
Incorrect installation will reduce the quality of the water heater, and the investment will not be justified. The type of heater can also play a role in the method of its installation. When installing, take into account the type of equipment used.