Other gate options for the private sector
Posted: Thu Feb 06, 2025 6:30 am
resistance to temperature changes (without electronics),
the ability to make the maximum width up to 15 meters,
comparatively cheap, provided that the system is not equipped with additional automation.
There is one drawback - they require a certain amount of space to open/close.
The rest depends on the materials used. For example, we make them from corrugated sheets that are resistant to rust and mechanical damage, with a service life of 20 years, any color thanks to the application of a polymer color coating. Since the design is simple and the materials are high-quality, the service life becomes really high - the maximum for metal corrugated sheets.
But let's assume that the space required for a swing design simply isn't there. Fortunately, there are several less space-consuming options with approximately the same functionality, advantages and disadvantages.
Sliding (retractable) - special runners are cyprus mobile database along the fence, along which the sashes slide in different directions (or the only sash moves to the left/right). Almost no space is used, about 30 cm along the fence is needed to organize sliding runners. There are special requirements: the site must be perfectly flat, it will have to be paved.
Roller shutters are an enlarged version of roller shutters on windows, kiosk display cases, and store doors. They are fragile and expensive, so they are relatively rarely used for outdoor entrances, but are very popular for garages. Roller shutters are switched on remotely, which is very convenient in winter. They take up virtually no space.
Sectional ones rise, moving upward. They are divided into separate plastic or steel sections outlined by a strong metal frame, and are much more often used for garages, especially those located directly on the ground floor of the house. Not the cheapest option.
It's up to you to decide which ones to choose. Swing and sliding are the most affordable, the other two types are more often used to decorate garages, shops and other premises. Absolutely everything can be equipped with automation.
We make sliding and swing gates from 3 to 6 meters wide, although the most popular option is 4 meters, two meters each leaf. We use corrugated sheets: galvanized and painted with polymer paint according to RAL. We make fences from the same material, so it is reliable, durable, without defects and flaws.
Call a surveyor, and he will tell you more about the optimal width of swing gates, wickets, and which option is best suited for your site.
the ability to make the maximum width up to 15 meters,
comparatively cheap, provided that the system is not equipped with additional automation.
There is one drawback - they require a certain amount of space to open/close.
The rest depends on the materials used. For example, we make them from corrugated sheets that are resistant to rust and mechanical damage, with a service life of 20 years, any color thanks to the application of a polymer color coating. Since the design is simple and the materials are high-quality, the service life becomes really high - the maximum for metal corrugated sheets.
But let's assume that the space required for a swing design simply isn't there. Fortunately, there are several less space-consuming options with approximately the same functionality, advantages and disadvantages.
Sliding (retractable) - special runners are cyprus mobile database along the fence, along which the sashes slide in different directions (or the only sash moves to the left/right). Almost no space is used, about 30 cm along the fence is needed to organize sliding runners. There are special requirements: the site must be perfectly flat, it will have to be paved.
Roller shutters are an enlarged version of roller shutters on windows, kiosk display cases, and store doors. They are fragile and expensive, so they are relatively rarely used for outdoor entrances, but are very popular for garages. Roller shutters are switched on remotely, which is very convenient in winter. They take up virtually no space.
Sectional ones rise, moving upward. They are divided into separate plastic or steel sections outlined by a strong metal frame, and are much more often used for garages, especially those located directly on the ground floor of the house. Not the cheapest option.
It's up to you to decide which ones to choose. Swing and sliding are the most affordable, the other two types are more often used to decorate garages, shops and other premises. Absolutely everything can be equipped with automation.
We make sliding and swing gates from 3 to 6 meters wide, although the most popular option is 4 meters, two meters each leaf. We use corrugated sheets: galvanized and painted with polymer paint according to RAL. We make fences from the same material, so it is reliable, durable, without defects and flaws.
Call a surveyor, and he will tell you more about the optimal width of swing gates, wickets, and which option is best suited for your site.