Mix the composition thoroughly.

[zihadhosenjm40]

Surfaces recommended for use:
Plastics, PVC (including laminated)
Metals, painted metals
Glass (except etched (frosted glass))
Granite, marble, tiles, ceramics, etc.
other non-absorbent surfaces
The composition creates an elastic film resistant to mechanical influences, resistant to negative and positive temperatures.
The composition is resistant to splashes of hot metal when working with a welding machine or grinder.
Instructions for use
Before applying the composition, it is recommended to clean the surface from contaminants that have a water-repellent effect.
Apply the composition at a temperature of + 100C.
The composition is applied using: a paint brush, roller, spray gun, spray gun, and also by dipping (dilution with water is allowed, but not more than 5%).
In places of joints, cracks and other depressions, it is bahrain mobile database to apply a thicker layer so that when removed, the bulk of the film pulls out the product that has penetrated into the depression.
The touch-drying time is 30 minutes at a temperature of +100C, it is recommended to remove the "Quart" film no earlier than 24 hours after application.
During the drying process, the composition forms a transparent, matte film.
The protective composition "Liquid film" MDK14 "Quart" is removed in large pieces or in one piece, having previously pryed it with a rubber spatula or other blunt, soft object. For easier removal of the composition, it is recommended to moisten it with water using a sprayer, rag or sponge.
The tool used to apply the composition should be washed with water after finishing the work.
The protective composition "Liquid film" MDK14 "Kvarta" is frost-resistant. The number of freeze/thaw cycles at temperatures down to -400C is at least 4. When defrosting, the composition completely restores its properties.
IMPORTANT
Do not apply to wooden surfaces!
The application/removal temperature should be at least 10-150C, otherwise the film will break and be removed in small fragments.
To create optimal protection, it is recommended to apply the composition in two layers.
Safety
Work should be carried out in a well-ventilated area.
The composition does not have a harmful effect on the human body and the environment, and in terms of the degree of impact on the human body, it belongs to the 4th hazard class.
Avoid contact with skin and eyes.