The wall frame can be assembled by installing

[zihadhosenjm40]

It is also necessary to acquire all kinds of mechanical, electrical, gasoline mechanisms and tools, since you can’t work with a screwdriver here. These acquisitions will not be superfluous in the household and in the future. And the process of building a barn with your own hands will bring more satisfaction and less fatigue. Now you can proceed directly to construction.

The first thing to do is to clear the site for the building from vegetation and level it. In the language of builders - to carry out planning.

If possible, it is better to cover the area with asphalt or concrete. Before this, compact the soil with crushed stone and sand.

The next stage is cutting the beams of the lower trim to the office 365 data dimensions, carefully covering them with an antiseptic agent and laying them with fastening to each other by any means: metal corners, overlays, sampling, etc. At the same time, you can lay the floor.

Floor for a barn

Real floorboards are very expensive. Therefore, as a rough preparation, you can lay any board on the joists, and then cover it with a sheet material of your choice: plywood, fiberboard or chipboard. And for warmth, make a heat-insulating layer of expanded clay between the joists.

the posts and cross beams directly in place, or it can be assembled in units on the ground with subsequent lifting and fastening. But here it is necessary to take into account that you can assemble a unit with your own hands alone, but you will not be able to lift and place it - you will need assistants. And one more important point - in the process of installing vertical posts, it is necessary to install diagonals to give the structure rigidity. Otherwise, the frame may fall apart.

Roofing device
Next, you can start installing the roof and roofing. It is best to build a rafter structure. A flat roof is not suitable for a utility block. Rafters can be successfully made with your own hands from a thick board or thin timber, using power tools purchased in advance.