Anchoring of gable walls is carried out:

[zihadhosenjm40]

If the gable is being installed for an uninsulated roof, then to increase the rigidity of the gable frame, spacers should be installed.
In order for the load to be redistributed to the walls and foundation, all structural elements must be firmly connected to each other. The connections are made by anchoring, the need for which increases sharply during the construction period, when the walls and roof of the house have already been built, and the door and window openings have not yet been arranged. It is needed to withstand both horizontal and vertical impacts.

The size of the anchor bolts and the distance between the philippines mobile database points are determined based on the slope of the structure, the size of the span and the width of the overhangs. In order to avoid dealing with teeth-grinding calculations, you can use tables from Norwegian engineers, compiled on the basis of many years of practice in low-rise frame construction.


To concrete floors. Anchor bolts for resistance to horizontal loads. Anchor bolts paired with metal corners to resist vertical forces.
To wooden floors. With metal perforated tape and slats nailed to the post and upper floor to resist vertically acting force – winds.
Strengthening the fastening of the gables to the wooden floors against the horizontal load is carried out during the installation of the supports; it is considered that the fasteners installed during the assembly of the frame are quite sufficient.

Before installing the gable overhangs, if they are included in the project, and performing the sheathing, door and window openings are arranged, boxes are constructed in which frames with opening sashes will be mounted. If only dormer windows are planned to be installed in a non-residential attic, then holes for their installation can be cut after installing the board sheathing.

Construction of the gable overhang
If a gable overhang is planned to protect the wall from the harmful effects of slanting rain, it is constructed from shortened rafters. Naturally, no insulation or special calculations are required for this. It is only desirable that the width of the gable overhang be approximately equal to the width of the cornice.